• Theses
are used to lower a fan to the required level.
• The rods come
in different lengths and can be cut and drilled to suit the customer's requirements.
• Available
in lengths of 12"(30cm), 18"(45cm) and 30"(76cm) and
in finishes: SS, CH, WH, PB, AB.
• The minimum
recommended height for a ceiling fan from floor to fan blades: 7'6" (2.3
metres). This will determine the rod length required.
|
• Not required on
dual mount fans.
• Used to convert flush fitting fans
to a drop-mounted version.
• For use in conservatories and areas
with high ceilings.
• When using a conversion kit the original
mounting should be removed.
• Finishes SS, CH, WH, PB, AB.
• Required only when the fan has to be
mounted on a sloped ceiling up to a 40 degree angle. |
• These controls do
not operate the fan reverse function.
• Fits into standard 25mm single gang
box.
• A single wall control operates the
fans
speeds only high, medium, low settings.
• Maximum power rating 200 watts.
• Requires twin earth and cable between fan
and control.
• Finishes: SS, CH, PB, WH, AB. |
• Dual switch requires
3-core and earth cable. (supply in return to fan return to
light and earth)
• Fits into a standard 25mm double
gang box.
• Finishes: SS, CH, WH, PB, AB.
|
• Controls 3 fan speeds
and light including dimming (not reverse).
• Additional fans can be controlled
by purchasing extra remote control systems.
• Requires twin earth cable to the
receiver on each. |
